Model Ships

A ship is a large, sea-going watercraft. more...

Home
Antiquities (Classical,...
Architectural & Garden
Asian Antiques
Books, Manuscripts
Collectibles
Cultures, Ethnicities
Decorative Arts
Ethnographic
Furniture
Maps, Atlases, Globes
Maritime
Anchors
Bells, Whistles
Clocks
Compasses
Diving Helmets
Fishing Nets, Floats
Lamps, Lighting
Model Ships
Other
Portholes
Scrimshaw
Sextants
Telescopes
Wheels
Musical Instruments
Other Antiques
Primitives
Rugs, Carpets
Science & Medicine
Silver
Textiles, Linens

A ship usually has sufficient size to carry its own boats, such as lifeboats, dinghies, or runabouts. A rule of thumb saying (though it doesn't always apply) goes: \"a boat can fit on a ship, but a ship can't fit on a boat\". Consequently submarines are referred to as \"boats\", because early submarines were small enough to be carried aboard a ship in transit to distant waters. Another type of large vessel which is traditionally called a boat is the Great Lakes freighter. Often local law and regulation will define the exact size (or the number of masts) which a boat requires to become a ship (cf. vessel).

During the age of sail, ship signified a ship-rigged vessel, that is, one with three or more masts, usually three, all square-rigged. Such a vessel would normally have one fore and aft sail on her aftermost mast which was usually the mizzen. Almost invariably she would also have a bowsprit but this was not part of the definition.

Nautical means related to sailors, particularly customs and practices at sea. Naval is the adjective pertaining to ships, though in common usage it has come to be more particularly associated with the noun 'navy'.

Measuring ships

One can measure ships in terms of overall length, length of the waterline, beam (breadth), depth (distance between the crown of the weather deck and the top of the keelson), draft (distance between the highest waterline and the bottom of the ship) and tonnage. A number of different tonnage definitions exist and are used when disturbing merchant ships for the purpose of tolls, taxation, etc.

In Britain until the Samuel Plimsoll Merchant Shipping Act of 1876, ship-owners could load their vessels until their decks were almost awash, resulting in a dangerously unstable condition. Additionally, anyone who signed onto such a ship for a voyage and, upon realizing the danger, chose to leave the ship, could end up in gaol.

Samuel Plimsoll, a member of Parliament, realised the problem and engaged some engineers to derive a fairly simple formula to determine the position of a line on the side of any specific ship's hull which, when it reached the surface of the water during loading of cargo, meant the ship had reached its maximum safe loading level. To this day, that mark, called the \"Plimsoll Mark\", exists on ships' sides, and consists of a circle with a horizontal line through the centre. Because different types of water, (summer, fresh, tropical fresh, winter north Atlantic) have different densities, subsequent regulations required painting a group of lines forward of the Plimsoll mark to indicate the safe depth (or freeboard above the surface) to which a specific ship could load in water of various densities. Hence the \"ladder\" of lines seen forward of the Plimsoll mark to this day. Or what we call for \"freeboard mark\" in the marine industry.

Read more at Wikipedia.org